The details of the choice of wheels for the stroller

The stroller is one of the main "tools" of each mother. Being high-quality and convenient, it guarantees simplicity and ease of use, the joy of walking. The article describes all the subtleties of the choice of wheels for the stroller - its main element.

A stroller without wheels turns into a useless design. It is they who provide maneuverability, durability, and cross-country ability of the first “car” of a child. Vehicles for children and parts for them at the moment there are many. All of them have a number of features.

All “gears” differ in the following criteria:

• maneuverability will increase the level of traffic control;
• patency will help to go to the right place at any time of the year;
• durability will save the family budget from unplanned waste;
• safety guarantees the preservation of life and health of children and their parents.

All of these features in varying degrees, are present in all relevant variations of the product under discussion. At first, the future buyer must decide what will be the determining factor for this and to what extent. In the future, he can easily vary the ratio of these criteria and choose exactly what suits him perfectly.

All current variations of the most mobile elements of children's transport can be divided into several types. All of them will differ in size, quantity and composite structures, quality of execution.

The modern market offers the broadest selection of baby supplies. This also applies to wheelchairs. Wheels for children's vehicles at the moment are divided into several types according to the following criteria: the number of monowheels, the materials of which they are made, and sizes.

One of the important design features is the number of twin wheels in the structure. The simplest and well-known variation is the monowheel. Wide or narrow, it always exists by itself. He has no twin wheels. It is precisely this that is used in the bulk of all moving products and special transport for children.

Transportation on four “walkers” is the most common and familiar option. They provide a high level of stability and maneuverability. With them it is very easy to overcome the drifts and bumps on the roads. For this reason, the bulk of all vehicles for children is equipped with a four-wheel system.

The original variation may seem tricycle "horse". In this case, one wheel is located in front, and two - behind. Several years ago, this type of transportation in some countries was considered a dangerous option. Today they are credited with a fairly high level of security. However, on the ramp with them still have to suffer.

There are models with twin or twin wheels. Here you can find cases with six, eight and twelve moving elements.Sellers claim that the use of such elements increases the maneuverability, stability and maneuverability of the “iron horse”. But the number of children that will be transported is also important: four wheels will not be enough for twins. Although, to be honest, climbing the stairs or using a ramp is unlikely for owners of these models.

A unique case in the modern world are models with the ability to move on two moving elements. They are an innovation, no specific feedback on this design yet. All that is known is that they safely move children on ordinary four wheels. If necessary, the product shifts so that only two wheels remain active.

The material from which the driving elements are produced for transport also greatly affects the characteristics of the entire product as a whole. At the moment, plastic and rubber (or its analogues) are used in production in various combinations and combinations.

The simplest case is plastic with a rim of foamed rubber. They are not afraid of punctures and significantly reduce the weight of the entire product.

The most common type is rubber inflatable wheels. They are known to mankind for quite some time. They provide the smoothest ride, even on a bumpy road. However, they need to be regularly pumped up. Everything else, they are afraid of punctures.

Compromise between the two previous ideas can make wheels made of foamed rubber. They do not need to pump up, it is difficult to damage. However, in our latitudes analogs of air chambers freeze in winter. They make a lot of noise from the frost and, possibly, lose their softness.

People with experience quite often suggest choosing polyurethane "parts" as a compromise. They will be more difficult in comparison with plastic counterparts, but their maneuverability and smoothness are much higher. And they are also very resistant to wear. This is due to the fact that they do not need to be inflated with air. You can even choose gel options.

It is also very important to pay attention to the material and performance of the discs. They are usually made of plastic or metal spokes. Plastic products have a much smaller mass. Metal knitting needles are considered more durable and durable material. In modern conditions, plastic is considered quite a worthy replacement for metal.

When choosing wheels, it is imperative to remember the quality of the product. Regardless of the materials, it must always be of the highest order.

The wheels can be very diverse, for example, swiveling or gel. Each has both its pros and cons. Also relevant is the model on three wheels, in which there is good pressure.

The classic pram loses its popularity, and it is replaced by a 2 in 1 or 3 in 1 transformer.

After reviewing the existing proposals, the prospective buyer will ask himself which of the best options. There is definitely no clear answer here. This is due to the fact that all the cases presented are good at themselves in certain areas and certain conditions.

If on the territory of future walks with a child there are good modern roads with a smooth surface, then you can stop at the simplest and cheapest construction.In a situation where progress has not reached the future parents, you should think about purchasing a product with a suspension or shock absorbers. Otherwise, walks with the child seem hell.

All modern and popular models are quite suitable for the territory of Europe. It can be plastic "gears", and analogues of foamed rubber. According to reviews of knowledgeable people, the roads there are much better than in the open spaces of Russia. It is the same with climate.

As for the territory of Russia and similar states, here it is better to pay attention to the advice of experienced parents. They will offer vehicles with large wheels made of rubber and air or polyurethane. With these means, the mother does not have to bypass the snow-covered or tinned sections of the road. And also big wheels with air will easily overcome cracks and bumps, the famous Russian dirt.

The size of the wheels affects all the same permeability of the whole structure. Here it is important to find a compromise and decide on priorities. Large "gears" will help owners overcome small obstacles and bumps. Their small counterparts will allow to maneuver.

In order not to be mistaken with the size, you need to think about this:

• determine the type of road;
• determine the type of vehicle itself.

Currently, the market offers a wide selection of children's vehicles and wheels for them. When searching for suitable "parts" it should be remembered that there are mobile wheels. They rotate around their axis and thus provide excellent maneuverability of the whole structure. However, they are not suitable for roads with holes and bumps. There they will become a source of constant problems.

However, in this case, you should not sacrifice the comfort of movement. You can opt for the wheels with a switch modes of movement, turns. In this case, you can always release the front "gears" in the "free swimming". It will also be easy to make their absolute fixation.

Change the wheel with a great desire on any device. However, you should prefer the idea of ​​removable wheels. They are much easier to repair or replace. Everything else this option is much easier to transport. During the seasons, he will also be very useful.

It would be useful to say that some modern manufacturers of children's things began to produce special runners. They can safely equip their cradle in a snowy time. True, to date, not all existing models are amenable to such technical re-equipment.

The sleeve, which needs to be lubricated, must first be removed by opening the latch. It is necessary to lubricate periodically.

There are people among us who are unable to make a decision on such a question on their own. They need the help of truly knowledgeable people. This part of the text is written for them. Experienced users of “flywheels” for children are happy to share their own experiences and help with the right choice.

The first step is to decide on the appointment. It is necessary to remember that a child who will “travel” on these wheels should not feel discomfort. Otherwise, he will seem naughty and not a good kid. Rolling elements must match the type of road.

For the streets of modern capital cities, the most popular and inexpensive options with a small radius, made in plastic, are quite suitable. This stroller will be enough for everyday short walks and trips to the store. This will be not only a maneuverable type, but also convenient, if necessary, to fold or move the “transportation” separately from the baby.

For the streets of other cities, to which progress has not yet reached its full extent, it is possible to offer options with wide metal wheels with very dense and rough high-quality rubber. She will always protect them from unforeseen situations.

For people who quite often go with the baby and the stroller on the road by car, you should advise the idea of ​​small or mobile removable wheels. They should not interfere with transportation.

For the inhabitants of Russian-speaking countries are usually advised "cola", able to absorb all the irregularities and blemishes of the road surface. And they must be of considerable diameter. The disc is better to choose from metal spokes.

The greater the radius of the disk, the easier and calmer you will seem your way. You should also take care of the quality of the performance of the wheels. After all, the poor quality of the rubber airbag will cause serious dissatisfaction from the need for constant concern about the integrity of the elements in contact with the ground. In the described case, the children's vehicle will have the necessary stability, good maneuverability. It will be able to overcome both long distances and difficult situations on the road.

Absolutely ideal may be a modern model of the stroller design. In this case, it can always be adjusted to the weather and other conditions of the upcoming walk. Here you can easily afford to purchase a complete set of several types of wheels and just change them. The only drawback of this alternative is that it all costs a lot of money.

What to choose - the question of each customer personally! Each of us decides for himself what to choose and what to sacrifice. However, when choosing the most movable parts of a child’s baby’s transport, the following set of rules and principles will be guided more correctly:

• the right parts guarantee the stability and reliability of the whole structure;
• the right elements guarantee the safety of the child and the peace of the mothers.

Choosing the right parts for the children's "cars", you must be guided by the principles of convenience and safety as a child who will be in it, and people who are close. The implementation of these simple rules and principles will bring you and others joy, peace and a sense of well-being. Many will agree that it is in this simple human happiness!

How to remove the wheel from the stroller, see the following video.